Lutron Electronics WA-2017SD - Salt Measurement and Calibration; Salt Measurement and Calibration Procedures

Standard value
1.318 1.413
1.318 1.318
*
If only intend to make the one point calibration,
just execute the 2 mS range ( 1.413 mS Cal. )
is enough.
*
Multi-points calibration procedures should
execute the 2 mS range ( 1.413 mS Cal. )
calibration at first, then make other ranges
(20 uS range, 20 mS range or 200 mS range )
calibration procedures following if necessary.
7. SALT MEASURING and
CALIBRATION
Fig. 4
23