Lutron Electronics WA-2017SD - Advanced Settings; Configuration Settings: SD Card, Clock, Power, Beep

12. ADVANCED SETTING
Under do not execute the Datalogger function,
press the " SET Button " ( 3-8, Fig. 1 ) continuously at
least two seconds will enter the " Advanced Setting " mode.
then press the " SET Button " ( 3-8, Fig. 1 ) once a while
in sequence to select the eight main function, the
display will show :
Sd F..... SD memory card Format
dAtE.....
.
Set clock time ( Year/Month/Date, Hour/Minute/
Second )
SP-t......Set sampling time ( Hour/Minute/Second )
PoFF.....Auto power OFF management
bEEP....
.
Set beeper sound ON/OFF
dEC......
.
Set SD card Decimal character
t-CF......Select the Temp. unit to or ℃℉
SALt.....
.
Set DO salt% compensation, DO only
High-...
.
Set DO height (meter) compensation, DO only
Highf....Set DO height (feet) compensation, DO only
PEr C....
.
Set CD temperature compensation factor, CD only
tdS.......
.
Set CD to TDS or TDS to CD, CD only
t-SEt....
.
Set pH manual Temp. compensation value, pH only
ESC...... Escape from the advanced setting
Remark :
a.DO - Dissolved oxygen Mode
CD - Conductivity/TDS Mode
pH - pH/mV Mode
b.During execute the " Advanced Setting " function,
if press " ESC Button " ( 3-3, Fig. 1 ) will exit the
" Advanced Setting " function, the LCD will return
to normal screen.
39