- 50 -
Product Name (Device label & Box label)
Each LUVOX device is highly configurable. This requires solid
product naming. The LUVOX NAMING CONVENTION is a
consistent rule followed by a set of numbers and characters. The
intent should be, that every party is able to identify a LUVOX
device by name, based on the sequence and the knowledge of the
rule.
This diagram will help you identifying your LUVOX device.
• The 1
st
column identifies the diagonal of the screen,
representing 10.4, 12.1, 15.0, 17.0 or 19.0 inch respectively.
• The 2
nd
column describes the presence of an optional touch
technology, representing No Touch, ACCUTOUCH,
INTELLITOUCH, CARROLLTOUCH or Surface Capacitive
respectively.
• The 3
rd
column splits up the device in an LCD Monitor or All-
In-One System respectively.
• The 4
th
column describes the touch interface in case of the
device being an LCD monitor representing No interface, USB,
Serial or Both (Combo). The 4
th
column is of no user
importance in case of the device being an All-In-One System.
• The 5
th
column represents the processor type being low speed
passive cooled or high speed active cooled.*
• The 6
th
column represents the amount of system RAM as 128,
256, 512, 1024 or 2048 respectively.
• The 7
th
column represents the type of drive storage
subsequently as Hard disk drive, Internal CF Flash Disk drive,
Double external CF slot (CF cards are not included) or Both
Hard Disk drive and Double external CF slot (CF cards not
included)
- 51 -
• The 8
th
column is related to the operating system installed on
the device. Representing No OS, MS Windows XP Pro NL or MS
Windows XP Pro EN.
• The 9
th
column defines the device being equipped as
Standard(N) or ProLine(E).
• The 10
th
column is the operating voltage of the device (please,
refer to page 34)
• The 11
th
column defines the presence of an internal speaker
system.
• The additional IP65 postfix points to the unit being equipped
with an IP65 Stainless Steel Front (= ACCUTOUCH or NO
touch).
NOTE: It is not possible to define the processor’s type and speed
out of the device’s product name. DOBIT, as the constructor, will
always stock the most appropriate INTEL processors in terms of
cost and performance available on the market at that moment.
Current processor type’s and speeds are always reported in the
product description, our website and the latest up-to-date sales
documentation.
Product Description (Device label & Box label)
This is the brief synthesis of above, containing the device’s most
important or extra specific properties.
Product number (Device label & Box label)
This number represent the constructor’s (DOBIT) part number of
the article.
Serial number (Device label & Box label)
This is the unique string identifying your LUVOX device.
Quality control compartment (Box label)
These two check-boxes are provided for internal quality control.
Both check-boxes will contain the tag of the quality engineer who
has checked the functionality of the device and the completeness
of the package’s content.
To Next Page
Loading...