- 8 -
4. return to previous level with MENU
Hue: Adjusts NTSC phase (NTSC only)
Saturation: Adjusts color level (NTSC & PAL)
Sharpness: Calibrate image focus (NTSC & PAL)
Position
1. In the main menu select POSITION
2. Press UP / DOWN to navigate
3. Press SELECT to adjust value with UP / DOWN
4. return to previous level with MENU
H. Position: Adjust horizontal position of the image
V. Position: Adjust vertical position of the image
(H. Position & V. Position have no effect in video mode)
OSD Menu
1. In the main menu select OSD MENU
2. Press UP / DOWN to navigate
3. Press SELECT to adjust value with UP / DOWN
4. return to previous level with MENU
OSD H. Pos: Adjust the horizontal position of OSD
OSD V. Pos: Adjust the vertical position of OSD
OSD Timer: Adjust OSD closing time when no actions
Language
1. In the main menu select LANGUAGE
2. Press UP / DOWN to navigate
3. Press SELECT to adjust value with UP / DOWN
4. return to previous level with MENU
Language: Select desired OSD language
- 9 -
Miscellaneous
1. In the main menu select MISCELANNEOUS
2. Press UP / DOWN to navigate
3. Press SELECT to adjust value with UP / DOWN
4. return to previous level with MENU
Signal Source: Select default input signal source
Reset: Returns all controls to factory settings
Audio: Adjust volume of internal amplifier
Mute: Toggle internal amplifier ON/OFF
Exit
Exit OSD menu
(Press SELECT only once. Otherwise the display mode will be
switched to the next input source)
To Next Page
Loading...