to within these limits the temperature display should
reappear. If actual room temp is not outside these
limits, there may be a malfunction. Press RESET
using a small Philips screw driver. Reconfigure and
reprogram.
"Override" appears on the display when the set
temp is raised or lowered from the program
temperature. Overrides are terminated at the next
scheduled program period when the unit will revert
to the program temperature and the "Override"
indicator will be extinguished.
Not Applicable. Display is not backlit.
Contact your HVAC service company or our
Technical Assistance Line if not resolved.
To Previous Page
Loading...
