2
PRESS and HOLD n (Stop) on
remote until indicator lights blink.
Note: Shade will jog to indicate
that the new Favorite setting
has been applied.
A. Open on the remote to open shade
B. Close on the remote to close shade
C. Right Arrow for vane operation
D. Left Arrow for vane operation
Manual Control
Button
Headrail
4
Note: To position additional shades,
repeat step 3 for each shade while
remote is in Programming Mode
3
1
[ 12 ] [ 13 ]
a. PRESS and HOLD manual control button on shade headrail. Then...
b. PRESS and RELEASE Favorite on remote.
Use remote to move shade(s) to
desired Favorite position.
Setting a Favorite
All shades come from the factory with a default Favorite position set at 50% open. If you prefer a
different shade position, you can create a custom Favorite.
Manual Control
Button
Headrail
2
Product Operation: Groups 1-6
PRESS and RELEASE either:
D
C
A
B
1
3
PRESS and RELEASE n (Stop) when
the desired shade position is reached.
PRESS and RELEASE desired Group number (1-6).
NOTE: Group numbers
(1-6) are selected or
deselected by pressing
the desired Group
number(s). Selected
Group numbers are
illuminated to indicate
they are active. Multiple
Groups can be selected
for simultaneous
operation.
RELEASE manual control button on
shade headrail.
To Next Page
Loading...
Need help?
General
