LuxaFlex PowerView Installation & Operation

3
INSTALLATION
Now that you have completed your shutter installation, you are ready to program your
PowerView
®
Shutters.
Connect the Power Source
NOTE: When power is connected to the motor, a green LED inside the programming button housing will
flash to indicate the louvres are ready for operation.
Remove the Battery Cover
NOTE: PowerView Shutters with a divider rail or split tilt will have two battery wands, one in the top rail and
one in the bottom rail.
■ Remove the battery cover from
the top and/or bottom rail by
sliding in direction of the unlock
icon indicated on the battery
cover.
CAUTION: When removing the battery cover,
use two hands to prevent the battery cover
and wand from falling.
Plug the Power Cable into the Battery
Wand
■ Locate the power cable inside the rail and plug it into the socket on the battery wand.
■ Place the battery pack into the clip
on the back of the battery cover.
■ Insert the battery cover into the rail
and secure it by sliding in the direction
of the lock icon indicated on the battery cover.
Battery Cover
Programming
Button
Back side of rail
Clip
Socket

LuxaFlex PowerView Specifications

General

App Control	Yes, via PowerView App
Automation System	PowerView Automation
Warranty	Limited Lifetime Warranty
Control System	PowerView
Power Source	Battery
Voice Control	Yes, via Amazon Alexa, Google Assistant, Apple HomeKit
Control Options	App, Voice, Remote
Style Options	Roller, Roman, Honeycomb, Pleated
Customization	Fabric
Product Type	Automated Window Shades
Material	Various fabrics and materials available