9
TROUBLESHOOTING
Problem
Batteries in the battery wand need to be replaced.
Solution
Replace the batteries in the battery wand.
Squeeze the cap latch to release the cap
and remove the cap from the battery wand.
Install the batteries according to the
instructions on the battery wand label.
Press the cap on until it latches.
NOTE:
AA alkaline batteries are recommended for use with our battery-powered shutters.
These will provide more than one year of operation, depending on usage. Lithium and
rechargeable batteries are not recommended.
Cap
Latch
Battery
Wand
Squeeze
To Next Page
Loading...
