LuxaFlex Roller blinds series User Manual

General information
The basic assembly instructions given in this booklet apply toall skylight products: roller blinds, Venetian
blinds, Plissé blinds,Duette® Shades and combined products (roller blinds withPlissé or Duette® and
Plissé with Duette®). Details of theassembly procedure can vary from one product to another asdescribed
below, however, it is important to read theinformation carefully before installing and using your skylight
Contents of Package
The package you have received should contain the following items :
• The Skylight product.
• 2 Cassette mounting brackets with 2 screws per bracket.
• 2 Packing profiles with 3 screws per profile (only for use with100 or 105° angle framed windows).
• 2 Side channels with 2 - 4 screws per channel depending onthe drop of your blind.
• 1 Side guiding sill bracket and cable locking ring (only suppliedfor wide Venetian blinds where a
centre support cable isrequired).
Please check that all the relevant components above have beensupplied.
Standard Fitting Procedure
1. Preparation for fitting
Remove the skylight from its packaging.
Warning:
- Keep the product stacked at this stage.
- Do not remove transport cord cleat(s) or retaining tapes yet.
2. Fitting the cassette mounting bracket
• Place the mounting brackets with the positioning
lip against thetop of the frame, at least 100 mm
from the edges [1
].
• Screw the brackets into place [2].
• Now break off the positioning lips [3].
Skylight products
Assembly and operating instructions for
GB
www.Luxaflex.com
1 - 4
product and to follow the assembly instructions carefully.
Skylight Products

LuxaFlex Roller blinds series Specifications

General

Type	Roller Blinds
Brand	LuxaFlex
Mounting	Inside mount, outside mount
Material	Polyester, PVC
Color Options	Wide range of colors
Operation	Manual or motorized
UV Protection	Yes (level varies by fabric)

Summary

General Information and Package Contents

Contents of Package

Lists components included in the package for skylight products, ensuring all parts are present before installation.

Standard Fitting Procedure

Preparation for Fitting

Instructions for preparing the skylight product before fitting, including warnings about handling and transport cords.

Fitting the Cassette Mounting Bracket

Steps to mount the cassette brackets onto the frame, including positioning, securing, and removing guide lips.

Mounting Packing Profiles

Guidance on attaching packing profiles for specific 100 or 105° angled window frames.

Fitting the Cassette

Instructions on how to insert and secure the cassette into the mounting brackets, ensuring it sits flush.

Mounting and Screwing Side Channels

Steps for attaching and securing the side channels to the frame, with warnings about cord trapping.

Removing Transport Cord Cleat

Instructions on how to safely remove and store the transport cord cleat for future use.

Mounting Cord Tension Clips

Guidance on attaching cord tension clips to side channels, with a specific warning for Duette® and Plissé shades.

Assembly Options

Centre Tension Cable for Venetian Blinds

Steps for installing a centre tension cable, specific to wide Luxaflex® Venetian blinds.

Operation, Demounting, and Cleaning

Opening and Closing

Method for opening and closing the skylight product, including use of an optional control rod.

Adjusting Slat Angle (Venetians)

How to adjust the angle of slats on Venetian blinds using the cassette knob or control rod.

Battery Driven Tilt (Venetians)

Operation of tilt functionality for Venetian blinds using a remote control transmitter.

Demounting Procedure

Instructions to completely demount the product by reversing the fitting steps.

Cleaning Skylight Products

Advice on cleaning Roller blinds, Duette® and Plissé shades, and Venetian blinds.