4
Names and Functions
1. Operation switch (OPERATION)
Toggles the power on and off.
When wiring or connection is performed, be sure to turn off
this switch.
2. Operation indicator (OPERATION)
Blinks in the time of muting mode when the operation
switch is turned on and lights up when the operation state
is activated afterward. This indicator blinks when the unit is
in the muting mode or when the volume is adjusted with the
remote control.
3. Input selector (INPUT SELECTOR)
Selects an input device from the devices such as a CD play-
er, an SACD player and a tuner connected to each input
terminal.
The input selector has 6 positions consisting of LINE-4,
LINE-3, LINE-2, LINE-1, BAL LINE, and PHONO from left
to right that correspond to each input terminal on the rear
panel. The knob is rotated to light the input indicator of the
input device to be selected.
4. Input indicator
Lights up at the input device to be selected with the input
selector or remote control.
Front panel
891011121314151617
5 6 7
1 2 43
To Next Page
Loading...
Need help?
General
