Luxtron FOT Lab Kit - Standard Probes and Accessories

System Components
2-2 FOT Lab Kit User’s Manual
Probes
Standard Probes Fluoroptic probes are non-metallic and immune to EMI and radio-
frequency noise. The standard probes generally consist of a fiber-
optic cable with LUXTRON’s temperature sensitive phosphor affixed
to the probing end and a fiber optic ST-style connector on the other
end for connection to the FOT Lab Kit.
Figure 2-1 Standard Probes for Use with FOT Lab Kit
Picture Description
Luxtron Part
Number
STM Probe
Application: General Purpose Immersion
Temp Range: 0 to 250
o
C
Response Time: 5s in still air
0.7s in stirred water
00-13244-XX
STF Probe
Application: Fast Response Immersion
Temp Range: 0 to 295
o
C
Response Time: 1.25s in still air
0.25s in stirred water
00-13737-XX
STS Probe
Application: Surface Contact
Temp Range: -25 to 200
o
C
Response Time: 25ms
00-13738-XX
STR Probe Kit
Application: Non-contact Remote
Temp Range: -25 to 330
o
C
Includes:
0.1 gm Luxtron’s Alpha phosphor sensor powder
1mL 150
o
C silicon binder
1mL 250
o
C silicon binder
1mL 450
o
C silicon binder
2m STP probe blank (see image at left)
Remote Sensing User’s Guide
06-13740-01
Probe tip is a polished,
open end fiber
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com