FOT Lab Kit User’s Manual 3-1
3 System Operation
The FOT Lab Kit is a fiber optic temperature measurement system.
All standard probes and fiber optic accessories for use with the FOT
Lab Kit have ST-style fiber optic connectors.
Getting Started
This “Getting Started” section will enable you to start basic
measurements, using default setups, with your FOT Lab Kit. For
more details on how to tailor the instrument to your specific needs,
please refer to the user interface details described in Chapter 4,
“User Interface Commands’’ and Chapter 5, “Temperature Data
Reporting’’.
Host Control To access the full features and interface of the FOT Lab Kit, you will
need a PC or host device to communicate via RS-232. If you are
using LUXTRON’s TrueTemp Software, we recommend you install
this software first, before connecting the instrument.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...