Simply Connected
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
5
Computer supporting TCP/IP and equipped with a Web browser. Supported
Web browser versions include I.E. 10.0, Firefox 3.6, Safari 5.0, Chrome 10.0, Opera
10.6 and up. The Web browser is used to confi gure the ABR-4400.
Power must be AC 100-240V~ 0.1A 50/60Hz.
Before Connecting to the Network
The ABR-4400 can be rack-mounted or used as a desktop router. Before connecting
to the network, please be aware of the following requirements:
Install the ABR-4400 in a stable/safe place to avoid any possible damage
Make sure there is adequate space around the ABR-4400 for adequate ventila-
tion and proper heat dissipation. It is recommended to have at least 4-6 inches
around all sides.
Do not place heavy articles on the ABR-4400.
Power outlets should be within 5 feet of the ABR-4400.
Verify the ground connection of the outlet is functioning properly.
Check the power cord to confi rm a secure connection.
Avoid placement in direct sunlight.
When installing the ABR-4400 on a fl at surface, attach the rubber feet to the
bottom of the device to avoid scratching the surface.
ABR-4400 INSTALLATION
Installing the ABR-4400 in a Rack
The ABR-4400 can easily be installed in a standard 19” rack. The ABR-4400 includes two
mounting ears for installing and stabilizing the router. For attaching the mounting ears
and installing the switch within a rack, please refer to the following illustration:
Rack-Mounting the ABR-4400
Using the included screws, attach the mounting ears to each side of
the switch,.
Mount the router in the rack with the LEDs facing outwards. Be sure the
router is level and properly secured within the rack.
To Next Page
Loading...
Need help?
General
