To Next PageTo Next Page
Need help?Do you have a question about the Luxul XMS-1024 and is the answer not in the manual?
General| Model | XMS-1024 |
|---|---|
| Ports | 24 |
| Total Ports | 24 |
| Managed | Yes |
| PoE Ports | No |
| Switching Capacity | 48 Gbps |
| Forwarding Rate | 35.7 Mpps |
| MAC Address Table Size | 8K |
| Jumbo Frame Support | Yes |
| Humidity | 10% to 90% non-condensing |
| Power Input | 100-240V AC, 50/60Hz |
| Dimensions | 17.3 x 11.0 x 1.7 inches |
| Mounting | Rack |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -40°F to 158°F |
| Port Speed | 10/100/1000 Mbps |
| Weight | 2.6 kg (5.73 lbs) |
Lists key features and capabilities of the XMS-1024, including port speeds and standards compliance.
Details technical specifications such as port count, MAC address table size, and transmission methods.
Step-by-step guide on how to log in to the XMS-1024's web management interface.
Covers configuring port operating modes, speed, duplex, and flow control for the XMS-1024.
Basic port configuration options like enabling/disabling ports and setting operating modes.
Explains how to create Virtual Local Area Networks (VLANs) for network segmentation and optimization.
Allows selection between Port VLAN and 802.1Q VLAN operating modes for the switch.
Configuration for Port VLAN, using physical ports to distinguish between VLANs.
Configuration for 802.1Q VLANs, using VLAN ID (VID) to distinguish traffic.
Details trunking (link aggregation) to expand bandwidth, provide failover, and increase error tolerance.
Configures Quality of Service (QoS) settings for priority-based packet processing.
Covers MAC filtering and static MAC address configurations for network access control.
Allows blocking specific MAC addresses from accessing the network.
Assigns and binds specific MAC addresses to ports for controlled network access.
Implements port-based authentication for network access control using 802.1X.
Configuration settings for 802.1X, including RADIUS server IP and authentication parameters.
Configures the 802.1X administrative and port states for individual switch ports.
