Luxul XMS-1024 - 5.12.7 Restore Factory Defaults; 5.12.8 Backup

luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460
User Guide
35

ARL Aging: Check to enable this function or uncheck to disable. It is enabled by
default
NO
TE:
It is not r
ecommended
t
o
dis
able
ARL Aging

Aging Time: Sets the aging time. 300 seconds by default.
NO
TE:
It is not r
ecommended
t
o
ha
ve
an Aging Time s
etting
gr
eater
than 3600 s
econds.
CAUTION: If “ARL Aging” is unchecked, the switch stops learning new
MAC addresses and the addresses in the MAC address table
turn into static MAC entries and are free from aging. This is
not recommended.
5.12.7 Restore Factory Defaults

Restore Factory Defaults: Click “Apply” to restore the factory default
configuration
CAUTION: Restoring default configuration will re-set all of your
settings to factory defaults. The switch will now have the
default IP address 192.168.0.2. For login, both default user
name and default password are “admin.”
5.12.8 Backup

Backup Current Settings: Click “Backup” to backup the current switch configura-
tion settings to a file