TEXTRON LYCOMING
OPERATOR'S
MANUAL
MAINTENANCE PROCEDURES
Page
Ignition and Electrical System
Ignition Harness and
Wire Replacement ..............
5-1
Timing Magnetos
to Engine ........................
5-1
Generator or Alternator
Output .....................
5-5
Fuel System
Repair of Fuel Leaks ..............................
5-5
Carburetor or
Fuel Injector
Inlet
Screen
Assembly ................................
5-5
Fuel Grades and Limitations
........................
5-5
Air Intake Ducts and Filters ......................... 5-5
Idle Speed and
Mixture Adjustment ..................
5-5
Lubrication System
Oil Grades and Limitations ..... .................... 5-6
Oil
Suction and Oil Pressure
Screens .................
5-6
Oil Pressure Relief Valve ........................... 5-6
Cylinder Assembly ................................. 5-7
Generator or Alternator Drive Belt Tension ............. 5-12
Turbocharger Control System ....................... 5-12