Lynx L42PSR-2 User Manual

35
SIdE BURNER/LpSGE HOOKUp
BUILT-IN INSTALLATION
► Shut off the gas supply at
the main valve.
► Disconnect all plumbing
(if already attached) from
the grill and the gas supply
valve.
► Remove all the ttings from
the grill manifold.
► Install the side burner into
the counter top cutout.
► Connect the gas supply to
the grill and side burner as
shown in the two diagrams
on this page.
► Turn the gas supply on and
leak test all connections.
(See INDEX: “Leak Test” for
further details.)
CART INSTALLATION
► Shut off the gas supply at
the main valve.
► Disconnect all plumbing
(if already attached) from
the grill and the gas supply
valve.
► Remove all the ttings from
the grill manifold.
► Install the side burner onto
the cart according to the
directions supplied with
the cart mounting kit.
► Connect the gas supply
to the grill and the side
burner as shown in the
diagrams on this page for
your gas type.
► Turn the gas supply on and
leak test all connections.
(See INDEX: “Leak Test” for
further details.)
Requires 3/4 - 1/2
Reducer

Lynx L42PSR-2 Specifications

General

Brand	Lynx
Model	L42PSR-2
Category	Grill
Language	English