NAPOLI PIZZA OVENS CARE & USE/INSTALLATION
|
17
POTENTIAL PROBLEMS ...continued
Pull on
spring
tabs to
release
light
cover
in place by two spring tension tabs. The bulbs are easily
removable without the use of tools. Simply grasp the glass
lens at the outer corners, near the front tension clips and
push the lens back. Then, swing the lens down and pull
it loose. You may have to loosen the screw to remove the
lens.
Avoid touching the glass of a new bulb. Halogen bulbs are
very sensitive to the oils found in human skin. Touching the
bulbs may shorten their life.
Pull the bulb straight out from the socket without twisting.
Hold the bulb using a paper towel or other cloth and gently
press it straight into the socket. The glass cover should be
gently snapped back into place.
To Next Page
Loading...
