5
English
Rear Panel Connectors
< Plug dynamic microphones into the Mic input (1)
< Use the Balanced Outputs to connect to powered speakers or an analog mixer (2)
< Use a 75-ohm S/PDIF cable to record from the S/PDIF digital output (44.1kHz only) (3)
< Included, optional mic stand mounting hardware (4)
< Connect an expression pedal, like the M-Audio EX-P, to the Expression pedal jack to control functions like wah effects (5)
< Connect a momentary pedal, like the M-Audio SP-1, to the P1 (6) and/or P2 (7) jacks to control functions like Start/Stop (6)
< Connect the USB connection on the Black Box to your computer with the included USB cable (8)
< Only use the 9V AC 1000ma power supply included in the package. Using an improper power supply can damage your unit (9)
< Use a Kensington lock system with the Kensington lock slot to protect your unit from theft (10)
Top Panel
Tap Tempo Key (31)
This key allows you to enter the tempo for the drum machine by tapping the tempo. As the effects are beat-synced to the drum
machine, this also sets the tempo of the effects. The drums do not need to be playing for the effects to lock to the tempo.
Amp Key (22)
Pressing the AMP key brings up the four AMP menus in the LCD; Amp Select, Amp Drive, Amp Bass and Amp Treble. The rotary
control under each menu parameter in the LCD allows you to change the parameter value. Holding the AMP key down for 1/2
second will turn the amp effect off. AMP OFF will be displayed in the LCD. Holding the AMP key down for 1/2 second again will turn
the amp effect back on, and AMP OFF will disappear from the LCD display.
To Next Page
Loading...
