M-Audio Fast Track Ultra 8R User Manual

User Guide 2Fast Track Ultra 8R
2 Fast Track Ultra 8R Features
• Eight balanced/unbalanced Mic/Line Inputs on combo XLR/TRS jacks
• Two front-panel 1/4” Instrument-level inputs
• Eight high-quality microphone preamps, featuring M-Audio’s award-winning Octane
TM
technology
• Individual mic pre input level controls with 20dB pads
• Dual front-panel Signal and Clip LED indicators
• Eight balanced/unbalanced line outputs on TRS jacks
• Two 1/4” inserts on TRS jacks
• Phantom Power switches with front-panel indicator LEDs
• Stereo S/PDIF digital I/O on coaxial jacks
• Two stereo headphone jacks with individual level controls
• MIDI Input and Output with front-panel MIDI I/O indicators
• Output Level control for main output pair 1/2
• Powerful onboard DSP providing four near-zero latency 16x2 monitor mixers
• Built-in reverb and delay effects
• Supports sample rates up to 96kHz, with full 24-bit resolution
• Integrated rear-panel Kensington security lock port
• Driver support for WDM/MME, ASIO2 (Windows XP, Windows Vista (32-bit editions)) and CoreAudio
(Mac OS X 10.4.11 / 10.5.2 or later)
➜ IMPORTANT NOTE: Fast Track Ultra 8R is a USB 2.0 device. USB 1.1 operation is
not supported.
➜ IMPORTANT NOTE: Fast Track Ultra 8R must be powered via the included
power supply. It will not operate on USB bus power.

M-Audio Fast Track Ultra 8R Specifications

General

Audio Interface Type	USB
Number of Mic Preamps	8
Analog Inputs	8 x XLR/TRS Combo
Analog Outputs	8 x TRS
MIDI I/O	In/Out
Phantom Power	Yes
Headphone Outputs	2
Sample Rate	96 kHz
Bit Depth	24-bit
Digital Inputs	1 x S/PDIF Coaxial
Digital Outputs	1 x S/PDIF Coaxial
Software Included	Pro Tools SE