To v erify your Windows installation after you have carefully followed these
instructions, you may check your system’s “Device Manager,” located in the
Control Panel under “System.” If you look in the Device Manager, you will find
2 parts for the Oxygen 8 KEYSTATION driver;one under the “Universal Serial
Bus” controller group and the other under the “Sound, video, & game
controllers” group.
Windows XP:
1 Insert the 'Oxygen 8' CD-ROM into your CD-ROM drive.
2. Open 'My Computer' or 'Windows Explorer' to locate your CD-ROM drive.
Double-click the CD-ROM drive that contains the Oxygen 8 CD-ROM.
Double-click the 'Oxygen 8' folder.
3. Double-click the driver icon to launch the installation procedure.
4. You will see an installer window advising you to have your Oxygen 8
DISCONNECTED from the USB bus before continuing.After you verify that
your device is disconnected,click 'Next' to continue.
5. You will see a warning that this device has not passed Windows logo testing.
Click "Continue anyway".
6. When the installer has completed installation,click “Finish”.Plug in your Oxygen 8.
5
To Next Page
Loading...
Need help?
General
