M-Audio OXYGEN PRO MINI User Manual

31
Third: The Encoder will send this Program message third when you press it.
Available Values: 0-127
Last: The Encoder will send this Program message last when you press it.
Available Values: 0-127
When set to Program IN/DC (PG IN/DC), these are the available parameters:
Type: The Encoder will send the next (Increment) or previous (Decrement) value number in
the range of values when you turn it.
Minimum: The lowest Program value in the range of values will correspond with this setting.
Available Values: 0-127
Maximum: The highest Program value in the range of values will correspond with this setting.
Available Values: 0-127
When set to CC Cycle, these are the available parameters:
CC: The Encoder will send its MIDI messages using this CC number.
Available Values: 0-127
Values: The Encoder will send the value with this CC number when you turn it, one at a time,
cycling through them with each notch.
Available Values:
• 2 Values
• 3 Values
• 4 Values
First: The Encoder will send the MIDI CC number with this value when you first turn it.
Available Values: 0-127
Second: The Encoder will send the MIDI CC number with this value at the second notch of the
turn.
Available Values: 0-127
Third: The Encoder will send the MIDI CC number with this value at the third notch of the turn.
Available Values: 0-127
Last: The Encoder will send the MIDI CC number with this value at the final notch of the turn.
Available Values: 0-127
When set to CC IN/DC, these are the available parameters:
CC: The Encoder will send its MIDI messages using this CC number.
Available Values: 0-127

M-Audio OXYGEN PRO MINI Specifications

General

Control type	Buttons, Rotary, Slider
Number of pads	8
MIDI-keyboard number of keys	32 keys
Product color	Black
Octave adjustment	Yes
Display type	OLED
Power source type	USB

Weight and Dimensions

Depth	190 mm
Width	401 mm
Height	60 mm
Weight	1200 g