M-Audio OXYGEN PRO MINI - Transport Control Buttons

43
Transport Control Buttons
To edit the functionality of the <<, >>, Loop, Stop, Play or Record buttons when in DAW Edit
Mode, press the <<, >>, Loop, Stop, Play or Record button. You can scroll through the
available parameter values using the Encoder. Select what parameter you would like to edit by
pressing the Encoder.
Channel: The <<, >>, Loop, Stop, Play or Record buttons will send their messages over this
channel. Select the global channel (Global), or a specific channel (Channel 1–16).
Available Values: Global, 1-16
Message:
• Mode: This will specify what message will be sent when the <<, >>, Loop, Stop, Play or
Record button is pressed.
o CC: When set to CC, the <<, >>, Loop, Stop, Play or Record button will send
standard MIDI CC messages to your DAW.
o Mackie: When set to Mackie Control, you can use the <<, >>, Loop, Stop, Play or
Record button with a DAW that responds to Mackie Control mode.
o Mackie/HUI: When set to Mackie/HUI, you can use the <<, >>, Loop, Stop, Play or
Record button with a DAW that responds to HUI mode.
• CC: Selects the MIDI CC value that will be sent when <<, >>, Loop, Stop, Play or Record
button is pressed.