39
Message:
• Mode: This will specify what message will be sent when the Encoder is turned.
o CC Relative: This is useful to send standard MIDI CC messages to your DAW.
o CC Inc/Dec: This is useful for scrolling through several CC values.
o Mackie Up/Down: This is useful to scroll up/down in a DAW that responds to
Mackie Control Mode.
o Mackie Left/Right: This is useful to scroll left/right in a DAW that responds to
Mackie Control Mode.
o HUI Up/Down: This is useful to scroll up/down in a DAW that responds to HUI
mode.
o HUI Left/Right: This is useful to scroll left/right in a DAW that responds to HUI
mode.
• CC Relative Type: The Encoder will send a value number in the range of values when
you turn it left or right.
• Right 65, Left 63
• Right 63, Left 65
• Right 127, Left 01
• Right 01, Left 127
• CC: Selects the MIDI CC value that will be sent when the Encoder is turned.
To Next Page
Loading...
