41
Back Button
To edit the functionality of the Back button when in DAW Edit Mode, press and hold the SHIFT
button and press the Back button. You can scroll through the available parameter values
using the Encoder. Select what parameter you would like to edit by pressing the Encoder.
Channel: The Back button will send its messages over this channel. Select the global channel
(Global), or a specific channel (Channel 1–16).
Available Values: Global, 1-16
Message:
• Mode: This will specify what message will be sent when the Back button is pressed.
o CC: When set to CC, the Back button will send standard MIDI CC messages to your
DAW.
o Mackie: When set to Mackie Control, you can use the Back button with a DAW that
responds to Mackie Control mode.
o Mackie/HUI: When set to Mackie/HUI, you can use the Back button with a DAW
that responds to HUI mode.
• CC: Selects the MIDI CC value that will be sent when the Back button is pressed.
To Next Page
Loading...
