54
Precautions for use and safety Precautions for use and safety
PRECAUTIONS FOR USE PRECAUTIONS FOR USE
INTERFERENCE WITH OTHER INTERFERENCE WITH OTHER
ELECTRICAL EQUIPMENTELECTRICAL EQUIPMENT
B.Beat PRO16 equipment complies with
the essential requirements of Annex I of
Directive 2014/35/EU (Electromagnetic
Compatibility Directive). In particular, the
equipment has been designed and man-
ufactured with technological progress in
mind, so that:
a) the electromagnetic disturbance pro-
duced does not exceed the level above
which radio and telecommunications
equipment or other equipment cannot
function normally;
b) they have a level of immunity to fore-
seeable electromagnetic disturbance in
accordance with their intended use that
allows normal operation without unac-
ceptable degradation.
However, equipment susceptible to inter-
ference or emitting powerful electromag-
netic waves could cause interference if
placed nearby. If this is the case, place
the other appliance away from each other.
With any type of digitally controlled elec-
tronic equipment, including, electromag-
netic interference, it can cause malfunc-
tioning, damage and destroy data, and
create problems. Be careful
CLEANINGCLEANING
Use a soft, dry cloth to clean the unit. If
necessary, moisten the cloth slightly.
Do not use abrasive cleaners, waxes or
solvents, including alcohol, benzene and
paint solvents.
MALFUNCTIONSMALFUNCTIONS
If the unit breaks down or does not work,
unplug the AC adapter immediately,
switch off the unit and disconnect the
other cables. Contact the distributor from
whom you purchased the unit or a B.Beat
PRO16 service centre with
the following information: product model,
serial number and detailed symptoms of
error or malfunction, together with your
name, address and telephone number.
COPYRIGHTCOPYRIGHT
Windows, Windows Vista, Windows XP
and Windows 7 are trademarks or reg-
istered trademarks of Microsoft Corpo-
ration. Macintosh and Mac OS are trade-
marks or registered trademarks of Apple
Inc. The SD and SDHC logos are registered
trademarks. All other product names,
trademarks and company names men-
tioned in this document remain the prop-
erty of their respective owners.
DISPOSALDISPOSAL
INFORMATION FO USERS pursuant to
Italian Legislative Decree no. 49 of 14
MARCH 2014 “Implementation of Direc-
tive 2012/19/EU on waste electrical and
electronic equipment (WEEE)”
The crossed-out wheelie bin symbol on
the equipment or on its packaging indi-
cates that the product at the end of its
service life must be collected separately
from other waste.
The separate collection of this end-of-
life equipment is organised and managed
by the manufacturer. Users who wish to
discard this equipment should therefore
contact the manufacturer and follow the
system the manufacturer has adopted to
enable separate collection of end-of-life
equipment.
To Next Page
Loading...
