M-tech LEGEND II PLUS - Dual Channel Watch Select; Other Functions; Confi Guration - EU; PL; D, EC; UK (CONFIG. SET MODE)

4.9 Dual channel watch select
①Select the sub channel to monitor or communication.
②Switch DW mode select switch to ON, the channel display will
flashing.
③Change the channel to be sub channel during the channel
display flashing.
④Press
[PTT]
or wait 5 sec. after select the sub channel for
confirmation.
⑤The radio will scan every 1 sec. for each the main and the sub
channel.
Press
[PTT]
will be use main channel to transmit. It can transmit by sub
channel within 3 sec. after received signal from sub channel
5.1 Configuration - EU; PL; D, EC; UK (CONFIGURATION SET MODE)
NOTE:
Don't use any other configuration. Some countries need an
user's license.
The frequency bands have to be chosen according to the country
of use.
①Switch the Function mode select switch to F.
②Turn power ON, then
CONFIGURATION SET MODE is displayed.
③ Turn the channel selector on the device or push
[UP]
/
[DN]
keys on the
microphone to select desired configuration.
④Push
[PTT]
key to set other items or switch the Function mode select
switch to OFF to restart the radio.
S E C T I O N
4/5
OTHER FUNCTIONS
14