M-tech LEGEND II PLUS - Key Beep; Roger Beep; TX Time out Timer

5.2 Key beep
①Press
[PTT]
key in CONFIGURATION SET MODE, then KEY BEEP SET MODE is
displayed.
②Turn the channel selector on the device or push
[UP]
/
[DN]
keys on the
microphone to select “b1” (beep on) or “b0”(beep off).
③ Push
[PTT]
key to set other items or switch the Function mode select
switch to OFF to restart the radio.
5.3 Roger beep
①Press
[PTT]
key in KEY BEEP SET MODE, then ROGER BEEP SET MODE is
displayed.
②Turn the channel selector on the device or push
[UP]
/
[DN]
keys on the
microphone to select “r0” (roger beep off) or “r1”(roger beep on).
③ Push
[PTT]
key to set other items or switch the Function mode select
switch to OFF to restart the radio.
5.4 TX time out timer
①Press
[PTT]
key in ROGER BEEP SET MODE, then TX TIME OUT TIMER SET MODE is
displayed.
②Turn the channel selector on the device or push
[UP]
/
[DN]
keys on the
microphone to select “t3” (3 min.), “t2” (2 min.), “t1” (1 min.) or “t0”
(0 min.).
③ Push
[PTT]
key to set other items or switch the Function mode select
switch to OFF to restart the radio.
SECTION 5
OTHER FUNCTIONS
15