Using this manual
23
2.6 Sync with PC
Sync is simplified form of Synchronization, which enables files transfer or back-up data
between PC and the device.
To synchronize the device with PC, one of the following sync programs must be installed on
the PC. Please download appropriate program depending on the operating system of the
PC
Sync program download
Windows Mobile Device Center (Windows Vista or later):
http://support.microsoft.com/en-us/kb/931937
ActiveSync (Windows XP): Download Link
2.6.1 How to sync
To sync, please follow the steps described below.
1. Download and install WMDC (or ActiveSync) on PC.
2. Connect client port of the cradle and PC using supplied USB cable.
3. Supply AC power to the cradle.
4. Turn on the device and place it on the cradle.
After step 4, your PC will automatically detect M3 UL10 and install Pocket_PC driver. Once
the driver installation is done successfully, you should be able to transfer files or back up files
on the device.
When you see a window similar to this, it
means your device is connected to the PC
correctly.
To Next Page
Loading...
Need help?
General
