6
CARING FOR YOUR HOVERBIKE DRONE
To fold, release the pins on the bottom side, then fold section over top.
Release the pins on the top side and partially fold section under.
Fold legs out and complete folding of section under.
Unfolding and folding
Reverse the process to unfold.
Water and dirt
Please keep you Hoverbike Drone dry and clean. Dust and particulates can enter into
the motor and bearings which can reduce the working life of your motors.
Structural integrity
Just like on a full size helicopter, you should pre-ight check your Hoverbike Drone
before powering on. This would include checking for the following items:
• All screws tight
• Structural fatigue, such as cracks or bends due to heavy landings/crashes
• Motor bearings and mounts
• Propeller mounts
• Plugs and general condition of wires
• Correct operation of ight controller on startup
Contents
System overview 4
In the box 5
Caring for Drone 6
You + Drone 7
Safety rst 8
First time setup 9
Batteries 12
Controls 12
Warning signals 14
First ight 15
Every ight 17
Flying modes 19
About Drone 20
To Next Page
Loading...