Mac allister MHTP24EB - Technical and legal information

GB
IE
In more detail...
Technical and legal information
MHTP24EB by MacAllister
28
Technical specication
> Engine type : 1E34F-2
> Engine displacement : 24.5 cm³
> Engine speed at maximum power : 8000 min
-1
> Recommended max. engine speed : 9500 min
-1
> Engine idle speed : 3300 min
-1
> Clutch engagement speed : 4200 min
-1
> Max. shaft break power, acc.
ISO 8893
: 0.85 kW
> Fuel tank volume: : 350 ml (cm³)
> Petrol type : #92,unleadedpetrol
> Engine oil type : 2-cycle motor oil
> Mixture ratio petrol : oil : 40:1
> Cutting capacity
• Max. cutting length : 550 mm
• Max. cutting diameter : 20 mm
• Max. teeth gap : 28 mm
> Cutting speed of blade 1900 min
-1
> Spark plug type NHSP LD L8RTF
> Spark plug gap 0.6 – 0.7 mm
> Net weight approx. 5.5 kg
> Noise according to ISO 11201, EN ISO 3744 and 2000/14/EC
• Sound pressure level L
pA
: 102.1 dB(A)
• Uncertainty K : 3 dB(A)
• Sound power level L
WA
: 107.1 dB(A)
• Uncertainty K : 3 dB(A)
• Guaranteed sound power level L
WA
: 110 dB(A)
> Hand arm vibration according to EN ISO 10517
• Front handle a
h
: 2.55 m/s²
• Rear handle a
h
: 2.97 m/s²
• Uncertainty K : 1.5 m/s²
Wearhearingprotection,especiallywhensoundpressureisover
80 dB(A).