Mac allister MHTP24EB - Product functions

GB
IE
In more detail...
Product functions
MHTP24EB by MacAllister
12
Intended use
This petrol hedge trimmer MHTP24EB is designated with an engine
displacement of 24.5 cm³. The product is intended for trimming
hedges, bushes and shrubs. Observe the technical data for the
maximum cutting capacity. Do not cut branches exceeding the
stated maximum capacity.This product is intended for private use
only,notforanycommercialapplications.Itmaynotbeusedforany
purposes other than those described.
Handle adjustment
The handle can be adjusted ± 90° to left and
right side according to the required cut.
> Press the unlock button (18) down and
hold it in its lower position (Fig. 3).
> Turn the rear handle (16) in desired
direction to the end. Make sure the
handle engages in position (Figs. 4 – 6).
18
16
Fig. 3
16
Fig. 4, left position Fig. 5, initial position Fig. 6, right position
WARNING! Only adjust the handle position when the
engine is switched off! Always ensure that the handle
locks in one of the end positions, never use it at an
intermediate position!
18
16
Fig. 3
16
Fig. 4, left position Fig. 5, initial position Fig. 6, right position
Fig. 3
Fig.4,leftposition Fig.5,initialposition Fig.6,rightposition