GB
IE
In more detail...
Operation
MHTP24EB by MacAllister
16
General behaviour
> Check the product as well as accessories for damage before
each use. Do not use the product if it is damaged or shows wear.
> Double check that accessories, safety guards and blades are
properlyxed.
> Always hold the product by its handles. Keep the handles dry to
ensure safe support.
> Ensure that the air vents are always unobstructed and clean.
Clean them if necessary with a soft brush. Blocked air vents may
lead to overheating and damage the product.
> Switch the product off immediately if you are disturbed while
working with it and when other people enter the working area.
Always let the product come to complete stop before putting it
down.
> Do not overwork yourself. Take breaks on a regular basis to
ensure you can concentrate on the work and have full control
over the product.
Trimming times
green leaf hedges June to October
evergreens April and August
conifers and other fast growing shrubs every 6 - 8 weeks
To Next Page
Loading...