Technical and legal information
MHTP24EB by MacAllister
GB
IE
In more detail...
33
> Wear hearing protection!
> Wear eye protection!
> In an emergency switch the product off by immediately releasing
the throttle trigger and setting the ignition switch to its off position
“O”.
Operation
> Stop the engine before
• cleaningorwhenclearingablockage,
• checking,carryingoutmaintenanceorworkingontheproduct,
• adjustingtheworkingpositionofthecuttingdevice,leavingthe
product unattended.
> Ensure that the product is correctly located in a designated
working position before starting the engine.
> While operating the product, always ensure that the operating
position is safe and secure.
> Do not operate the product with a damaged or excessively worn
cutting device.
> To reduce re hazards, keep the engine and silencer free of
debris,leavesandexcessivelubricant.
> Alwaysensurethatallhandlesandguardsarettedwhenusing
the product. Never attempt to use an incomplete product or one
ttedwithanunauthorisedmodication.
> Always use two hands to operate a product tted with two
handles.
> Always be aware of your surroundings and stay alert for possible
hazards of which you may not be aware due to the noise of the
product.
> Nevercarelesslytouchtheproduct,youcanburnyourself.While
theproductisinoperationorshortlythereafter,itspartssuchas
theexhaustpipe,engine,andothersurfacesareextremelyhot!
Pay attention to the markings on the product.
> Make sure that the air intake of the combustion engine is clear.
Keeptheairintakefreeofdust,dirtparticles,gasesandfumes.
> Make sure that air circulation is adequate and good. The product
must be easily accessible from all sides.