Mac allister MHTP24EB - Page 36

GB
IE
In more detail...
Technical and legal information
MHTP24EB by MacAllister
36
Safety warnings
Vibration and noise reduction
Toreducetheimpactofnoiseandvibrationemission,limitthetime
ofoperation, use low-vibrationand low-noiseoperating modes as
well as wear personal protective equipment.
Take the following points into account to minimize the vibration and
noise exposure risks:
> Only use the product as intended by its design and these
instructions.
> Ensure that the product is in good condition and well maintained.
> Use correct application tools for the product and ensure they in
good condition.
> Keep tight grip on the handles/grip surface.
> Maintain this product in accordance with these instructions and
keep it well lubricated (where appropriate).
> Plan your work schedule to spread any high vibration tool use
across a number of days.
Emergency
Familiarise yourself with the use of this product by means of this
instruction manual. Memorise the safety directions and follow them
to the letter. This will help to prevent risks and hazards.
> Always be alert when using this product, so that you can
recognise and handle risks early. Fast intervention can prevent
serious injury and damage to property.
> Stop the engine and unplug the spark plug connector
if there is any malfunction. Have the product checked by a
qualiedspecialistandrepaired,ifnecessary,beforeyouputit
into operation again.
> In case of re stop the engine and unplug the spark plug
connector.Takere-extinguishingmeasuresimmediatelyifthe
product switch is no longer accessible.
WARNING! Never use water to extinguish a product
on re.Burning fuel must be extinguished with special
extinguishing agents. We recommend that you keep a
suitablereextinguisherwithinreachinyourworkarea!