Mac Tools
September, 2000
ISO8662, PNEUROP PN8NTC1
(2000 → ) A00H XXXXX →
Model AW7500 Ultra Duty Impact Wrench
98/37/EC
Columbus, OHIO 43232 USA
5
DECLARATION OF CONFORMITY
We
(supplier’s name)
(address)
declare under our sole responsibility that the product,
to which this declaration relates, is in compliance with the provisions of
Directives.
By using the following Principle Standards:
Serial No. Range
Bill Mark
Name
and
signature
of
authorised
persons
Date
SAVE THESE INSTRUCTIONS. DO NOT DESTROY.
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
To Next Page
Loading...
