Mackie 1202VLZ4 User Manual

1202VLZ4
OWNER’S MANUAL
12-Channel Compact Mixer
POWER ON
PHANTOM ON
CAUTION: TO REDUCE THE RISK OF FIRE
REPLACE WITH CORRECT TYPE FUSE. REMOVE
POWER CORD BEFORE CHANGING VOLTAGE.
100VAC 120VAC 240VAC
MIC
+ 4
4 3
4 / R 3 / L
CHANNEL INSERT
BAL / UNBAL
R L
CONTROL
ROOM
BAL / UNBAL
ALT
OUT
2 1
PRE-FADER / PRE EQ TIP SEND / RING RETURN
100-120V: 500mA/250 V SLO-BLO
220-240V: 250mA/250 V SLO-BLO
REPLACE WITH THE SAME TYPE FUSE AND RATING.
DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE
UTILISE UN FUSIBLE DE RECHANGE DE MÊME TYPE.
DEBRANCHER AVANT DE REMPLACER LE FUSIBLE
MAIN
OUT LEVEL
MAIN
RIGHT
BALANCED
MAIN
LEFT
BALANCED
REVISION
SERIAL NUMBER
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE. DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
AVIS: RISQUE DE CHOC ELECTRIQUE — NE PAS OUVRIR
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES FOR THE U.S. AND THE ICES-003 FOR CANADA.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.

Mackie 1202VLZ4 Specifications

General

Frequency range	20 - 20000 Hz
Channels quantity	12 channels
Digital sound processing	- bit
Line Signal-to-Noise Ratio (SNR)	90 dB
Microphone input impedance	2500 Ω
DJ mixer	-
Power consumption (typical)	25 W

Weight and Dimensions

Depth	272 mm
Width	303 mm
Height	75 mm
Weight	3000 g