Mackie DRM18S - Flown DRM18 S Subwoofers with DRM12 A Loudspeakers

DRM18S 2000W 18" Professional Powered Subwoofer
8
DRM18S 2000W 18” Professional Powered Subwoofer
Hookup Diagrams continued...
Two flown DRM8S subwoofers with four DRM2A arrayable loudspeakers
This setup is perfect for installs, touring systems, festivals and/or small stages...any venue requiring a 75–00 foot throw.
Two subwoofers are introduced to this setup, providing even low frequency coverage for the flown subs.
It is possible to reproduce this exact same hookup in stereo. Simply utilize the lef and right main outputs from the mixer
to feed the main inputs of the top subwoofers to mirror the rest of the system as identified here.
Another important aspect to keep in mind is the rigging setup of loudspeakers. In this diagram, the DRM8S subwoofers
and DRM2A powered arrayable loudspeakers are flown utilizing an FB00 Flybar. Note that each subwoofer requires
its own FKDRM18S Flyware Kit, as well. Refer to pages 8 and 9 for more information about rigging (and eyebolts).
You will want to set the crossover on both subwoofers to DRM Top as described in detail on page 3.
FKDRM18S Flyware Kit
FB100 Flybar