Need help?Do you have a question about the Mackie DLM12S and is the answer not in the manual?
General| LF Driver Size | 12 inches |
|---|---|
| Inputs | XLR, 1/4" TRS |
| Outputs | XLR |
| Width | 16.5 inches |
| Weight | 50 lbs |
| Type | Powered |
| Crossover Frequency | 80Hz - 130 Hz |
| Enclosure Material | Plywood |
Proper disposal of electronic waste according to WEEE Directive and national law.
Details the 2000W Class-D amplification and 12" woofer specifications.
Explains the integrated digital processor with OLED screen and advanced functions.
Highlights features for professional audio system control and alignment capabilities.
Describes the compact size, portability, and mounting options of the subwoofer.
Guides users through initial connections and power-up sequence for the subwoofer.
Illustrates a typical connection diagram for a small club audio setup.
Details a connection setup for a DJ using a laptop and Mackie mixer.
Explains connecting multiple DLM12S subwoofers in series for expanded low-frequency output.
Illustrates a large club audio setup using multiple DLM12S subwoofers and DLM loudspeakers.
Details the standard 3-prong IEC power connector and AC outlet requirements.
Explains the rocker switch operation and power-on/off sequence.
Advises against obstructing ventilation openings to prevent overheating.
Describes the balanced XLR connectors for line-level signal input.
Allows 180° polarity reversal for optimal system blend with loudspeakers.
Provides line-level outputs for frequencies above the crossover for loudspeakers.
Offers direct copy of input signals for daisy-chaining or sending to other devices.
Selects stereo separation or mono summing for the full range outputs.
Shows subwoofer status, volume, crossover, and delay settings.
Controls the subwoofer's overall signal level and volume adjustment.
Selects preset or variable crossover frequencies for system optimization.
Manages the front panel LED status, including a limit indicator.
Adjusts delay time for system alignment, such as delay stacks or balcony fills.
Saves and recalls user presets for instant venue setting recall.
Locks the interface to prevent accidental button presses, indicated by a padlock icon.
Used in conjunction with other buttons to adjust settings and save/recall presets.
Allows switching between full 2000W output and a low 2W mode for testing or specific applications.
Built-in compression circuit protects the driver from transient peaks and clipping.
A high-pass filter prevents very low frequencies from damaging the woofer.
Monitors amplifier temperature and mutes output if overheating occurs.
Stresses the need for adequate AC power supply and voltage for optimal performance.
Advises that the subwoofer is for floor/stage placement only, not pole-mounting or suspension.
Explains how the polarity switch affects sound and system blending.
Provides instructions for avoiding moisture, cold, and proper cleaning methods.
Offers solutions for problems like no power, no sound, poor bass, noise, and hum.
Directs users to website or phone for warranty and non-warranty service information.
Details how to find authorized service centers and contact technical support.
Describes the wiring standards for XLR input and output connectors.
Explains the process and benefits of connecting multiple subwoofers via full-range outputs.
Lists detailed technical specifications including acoustic, transducer, power, and processing data.
To Next Page
