HDA Specifi cations Continued...
©2010 LOUD Technologies Inc.
All Rights Reserved.
Safety Features
Input Protection: RMS limiting, power supply and
amplifi er thermal protection
Display LEDs: Power ON, Voicing Mode selection,
Sig/Limit, Thermal protection,
Front Power ON
Construction Features
Basic Design Trapezoidal, 20˚ included angle
Cabinet 15 mm exterior grade premium
birch plywood
Finish High durability black paint
Handles One on each side
Grille Powder-coated galvanized steel
Fly Points Four M10 x 1.5 mm
Pole Mount Diameter 1.42 in / 36 mm
Pole Mount Angle 10˚ and 30˚
FB121 Hole Diameter 0.81 in / 21 mm
Physical Properties
Height 14.7 in / 373 mm
Width 24.7 in / 628 mm
Depth 15.9 in / 405 mm
Weight 59 lb / 26.7 kg
Mounting Methods
Pole mount, integral rigging fl ybar, stack on top or fl y
underneath subwoofer(s), or fl y via 4 integrated M10 mounting
points (using M10 x 1.5 x 37 mm forged shoulder eyebolts). See
page 18 for more information.
Options
PA-A2 Forged Shoulder Eyebolt Kit (4 x M10 x 1.5mm x 37mm)
SPM200 Loudspeaker Pole Mount
FB121 HDA Flybar
Disclaimer
Since we are always striving to make our products better by
in cor po rat ing new and im proved ma te ri als, com po nents, and
man u fac tur ing methods, we re serve the right to change these
spec i fi ca tions at any time with out no tice.
“Mackie” and the “Running Man” fi gure are reg is tered
trade marks of LOUD Technologies Inc.
All other brand names men tioned are trade marks or registered
trademarks of their respective hold ers, and are hereby
ac knowl edged.
HDA Dimensions
14.7 in /
373 mm
9.1 in /
232 mm
24.7 in /
628 mm
15.9 in /
405 mm
WEIGHT
59 lb
26.7 kg
26
HDA
HDA
To Next Page
Loading...
