MP-20TWS True Wireless Dual-Driver Earbuds with Active Noise Cancelling
8
MP-20TWS True Wireless Dual-Driver Earbuds with Active Noise Cancelling
MP-20TWS Features continued...
Pairing and Connecting with Bluetooth
Voice prompts will indicate the power on /o status,
as well as the connecting / paired status.
Upon powering up the wireless earbuds,
the Bluetooth function is either:
() In sleep mode. See ‘Pairing and connecting
for the first time’ (below) or...
(2) ...Paired and connected. See ‘Previously paired
and connected devices’ (also below).
Pairing and connecting for the first time:
On the first power-up, a voice prompt will state,
“power on” followed by, “ready to pair”.
While the earbuds are in pairing mode,
simultaneously scan for Bluetooth devices on
the computer or device. You should see ‘MP-20TWS’
appear in the list of “available devices”. Select it by
tapping it. From there, your Bluetooth device should
indicate that it is successfully connected (“pairing
complete”).
If this does not work, start the pairing process again,
and make sure that the earbuds and computer / device
are both in pairing mode at the same time.
Previously paired and connected devices:
The Bluetooth connection will disconnect if it’s out
of range. Previously paired and connected devices will
automatically reconnect upon subsequent power-ups;
no need to re-pair devices each time! In this case,
a voice prompt will state, “power on” followed by,
“connected”.
If you would prefer to manually place the earbuds
into Bluetooth pairing mode while they’re in the case,
press and hold down the case button for 3 seconds.
The Bluetooth connection may disconnect
when aected by electrostatic discharge
(ESD) or electrical fast transients (EFT).
If this occurs, manually reconnect the Bluetooth
connection.
Active Noise Cancelling (ANC)
Active Noise Cancelling (ANC) is ofen thought
of as “Active Noise Control.” It is a way to remove
(or “cancel”) any unwanted sound, by essentially
“creating” an inverted sine wave, throwing the signal
out-of-phase. This is all automatic and there is nothing
you need to do other than decide if you want ANC on
or not. Try it with, then without, to see which you prefer!
As mentioned previously, tapping the lef side
of the earbud thrice quickly will cycle through
the noise cancelling modes – ANC On, Wind Reduction
Mode, and ANC O. A “noise cancelling on”, “noise
cancelling o”, or “wind noise reduction” voice prompt
will confirm the choice.
The MP-20TWS earbuds also have ambient
mode. A quick single-tap on the lef earbud
will add/remove “ambient sound”. A voice
prompt will confirm the choice.
Care and Maintenance
Your wireless earbuds will provide many years
of reliable service if you follow these simple guidelines:
• Avoid exposing them to moisture. If they will
be used outdoors, be sure they are under cover
if rain is expected.
• Use a dry cloth to clean the earbuds. Avoid
getting moisture into any of the openings of the
earbuds, particularly where the drivers are located.
Now that we feel confident in your ability to take care
of the MP-20TWS earbuds and maintain them for years
to come, we are here to inform you that they have a
waterproof rating of IPX4! Oh, cool!
But, wait... what does that mean exactly? The IP Code
– aka ingress protection code – determines the amount
of protection a device has from water, dust and other
particles.
Safety first! Here is what is OK to do:
• IPX1: Protection from dripping water and sweat.
Exercising, for example.
• IPX2: Protection from vertically dripping water.
It’s not hot and sunny everywhere. It rains in some
places. You will be protected from a light drizzle.
• IPX3: Protection from sprayed water. Is your
wife watering the plants with a water bottle
when she “accidentally” sprays you seven
or eight times? This is A-ok, too!
• IPX4: Protection from splashed water.
Perhaps you’re poolside catching rays while
sipping on umbrella drinks on an all-expenses
paid vacation. Of course the kids love swimming
and playing pool games. Typically this results
in you – not anyone else, of course, just you –
catching their splashed pool water. Here, you
and the MP-20TWS earbuds are safe, too!
Now that you know what is OK to do, here is what
NOT to do. Attempting any of the following will void
your warranty: holding them under a running faucet,
spraying a hose directly on them, taking a shower
with them, submerging them under water and anything
of the like.
To Next Page
Loading...
