SP260 2x6 Speaker Processor
30
SP260 2x6 Speaker Processor
Appendix D: SP260 Processing Parameters
Operating Modes and Presets
2xStereo+Sub Two full-range loudspeaker pairs and a pair
of [mono by default] subwoofers
2x2Way+Sub Two bi-ampable full-range loudspeakers and
a pair of [mono by default] subwoofers
2x3Way Two tri-ampable full-range loudspeakers
3xStereo Three full-range loudspeaker pairs
1x6Way Mono 6-way setup
Inputs
Gain:
±
15 dB
±
0.1 dB increments
Delay:
Time (ms): 0.0000 – 600.9984 ms
±
1.000 ms and
±
0.0208 ms increments
Distance (m): 0.000 – 204.339 m
~
±
0.340 m and
±~
0.007 m increments
Distance (feet): 0.000 – 670.233 feet
±~
1.115 feet and
±~
0.023 feet increments
EQ Bypass: On or Off
5-band EQ:
Frequency: 20 Hz – 20 kHz
~1/24 octave increments
Bandwidth: 0.05 – 3.0
±
0.05 increments
Gain:
±
15 dB
±
0.5 dB increments
High or low-shelving: 6 or 12 dB / oct
Outputs
Name: User-editable
Source: InA, InB, InA+InB
Polarity: 180˚ invert
Gain: –12.0 dB to +6.0 dB
±
0.1 dB increments
Outputs Continued...
EQ Bypass: On or Off
7-band EQ:
Frequency: 20 Hz – 20 kHz
~1/24 octave increments
Bandwidth: 0.05 – 3.0
±
0.05 increments
Gain:
±
15 dB
±
0.5 dB increments
High or low-shelving: 6 or 12 dB / oct
Delay:
Time (ms): 0.0000 – 600.9984 ms
±
1.000 ms and
±
0.0208 ms increments
Distance (m): 0.000 – 204.339 m
~
±
0.340 m and
±~
0.007 m increments
Distance (feet): 0.000 – 670.233 feet
±~
1.115 feet and
±~
0.023 feet increments
High- and Low-Pass Filters:
Frequency: 20 Hz – 20 kHz
Filter / Slope: No Cut-Off
Butterworth 6 dB / octave
Butterworth 12 dB / octave
Linkwitz-Riley 12 dB / octave
Bessel 12 dB / octave
Butterworth 18 dB / octave
Butterworth 24 dB / octave
Linkwitz-Riley 24 dB / octave
Bessel 24 dB / octave
Limiter:
Attack: 5 – 200 ms
[5 ms – 20 ms]
±
1 ms increments
[20 ms – 30 ms]
±
5 ms increments
[30 ms – 100 ms]
±
10 ms increments
[100 ms – 200 ms]
±
20 ms increments
Release: 0.1 – 3.0 s
±
0.1 s increments
Threshold: –10 to +20 dBu
±
0.2 dBu increments
To Next Page
Loading...
