Mackie TH-15A Specifications

1/6 PAGES
TH-15A
POWERED
LOUDSPEAKER
FEATURES:
■ 2-way bi-amplified, optimized powered loudspeaker
system
■ 400W peak of ultra-efficient Fast Recovery
™
amplification
 •LF300Wpeakpower(Class-D)
 •HF100Wpeakpower(Class-A/B)
■ High-outputtransducers
 •15"high-precisionwoofer
 •1"compressiondriver
■ MackieActiveelectronicsprovidetotalsystem 
optimization
 •Precision2-waycrossover
 •Transducertime-alignment
■ User-adjustable3-bandcontourEQwithsweepable 
mid-frequency
■ Mic/Lineinputfordirectconnectionofa  
 microphoneormixeroutput
■ Tough,impact-resistantpolypropyleneenclosure
■ Pole-mountableandoorwedge-able
■ Extremelylightweightandportable(36lb/16.3kg)
TH-15A
The Mackie TH-15A is a full-range, portable, powered
loudspeaker system providing high-output, ultra-wide
dispersion and low-distortion performance in a compact,
lightweight design. Two Fast Recovery™ amplifiers
independently power a 15-inch neodymium woofer and a
precision 1-inch compression driver. Mackie’s
sophisticated Active electronics provide phase correction,
crossover, time correction, equalization and protection
circuitry.
Mackie-designed Active electronics provide a host of
processing designed to enhance the performance of the
TH-15A. Equalization, crossover, and time alignment are
working at all times to improve sonic performance. Protective
circuitry includes over-excursion protection, thermal
protection shutdown, auto reset, and driver protection,
including independent HF and LF compressors.
The TH-15A features a number of dedicated controls includ ing
an EQ on/off switch, a 3-band EQ/contour section, and a single
microphone and line input level control.
The center of gravity, handle locations, handle design, and
ease of use have been ergonomically designed. There is also an
integrated pole mount cup and a weather-resis tant steel grille.
The trapezoidal cabinet has been designed to provide an ideal
floor monitoring position.
The cabinet is constructed of high-pressure injected
polypropylene. The enclosure features reinforcement ribbing
and structural strengthening resulting in a strong, super-rigid
design providing ideal acoustical characteristics.
APPLICATIONS
Small club/band PA systems, houses of worship,
DJs, vocal/band monitor wedges, gymnasiums, banquet
halls, conference rooms and many, many more.

Mackie TH-15A Specifications

General

Power Output	400W
LF Driver	15" woofer
HF Driver	1" compression driver
Inputs	XLR, 1/4" TRS
Type	Active
Crossover Frequency	3 kHz
Enclosure	Polypropylene
Outputs	XLR Thru
Input Impedance	10k ohms
Amplifier Power	HF: 100W