EasyManua.ls Logo

Maco HS Salamander evolution Drive 82 - User Manual

Default Icon
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MACO
RAIL-SYSTEMS
PVC
LIFT&SLIDE HARDWARE
ASSEMBLY INSTRUCTIONS
HS Salamander evolution Drive 82
Exclusively for certied specialists!
TECHNOLOGY IN MOTION
maco.eu
Question and Answer IconNeed help?

Do you have a question about the Maco HS Salamander evolution Drive 82 and is the answer not in the manual?

Summary

Important Information

General Information

General terms, liability, and documentation references.

General Safety Information

Details safety warnings, danger, warning, and attention symbols.

Note

Notes on assembly, greasing, and proper installation orientation.

Intended Use

Specifies intended applications, screw torque, and material handling.

Improper Use

Warns against non-MACO parts, sealants, and surface treatments.

Storage and Handling

Covers proper storage conditions and transport guidelines for hardware.

Key and Abbreviations

Version and Application Area

Version

Illustrates different window schemes and configurations.

Application Area

Details application ranges and maximum sash weights for hardware.

Hardware Overview

Assembly on the Frame

Calculation Formulas Scheme A

Provides specific formulas for calculating lengths in Scheme A.

Calculation Formulas Scheme C + G1

Details calculation formulas for Schemes C and G1.

Supplement Calculation Formulas Scheme G1

Offers additional calculation formulas for Scheme G1.

Calculation Formulas Scheme K + D

Presents calculation formulas for Schemes K and D.

Threshold Assembly Scheme A, C, G1, K

Illustrates threshold assembly for various schemes.

Threshold Assembly Scheme D

Details the threshold assembly procedure for Scheme D.

Assembly on the Sash

Drilling and Milling on the Sash

Guides on drilling and milling operations for the sash.

Drilling and Milling Jig for HS Handle

Explains the use of a jig for drilling and milling HS handles.

Milling for Hook Drive Gear

Details the milling process for the hook drive gear.

Roller Assembly

Describes the steps for assembling the rollers.

Drive Gear Assembly

Illustrates the process of assembling the drive gear.

Handle Assembly

Provides step-by-step instructions for handle assembly.

Assembly on the Sash and Frame

Gasket Bridge Scheme D

Shows the installation of the gasket bridge for Scheme D.

Gasket Block Scheme D

Illustrates the mounting of the gasket block for Scheme D.

Locking Bolts A, K, D

Details the installation of locking bolts for specific schemes.

Locking Bolts C, G1

Explains the mounting of locking bolts for Schemes C and G1.

Striker Plate for Hook Drive Gear

Describes the fitting of the striker plate for hook drive gear.

Striker Plate for Hook Drive Gear Scheme C, G1

Details striker plate fitting for Schemes C and G1.

Locking Block

Shows the procedure for installing the locking block.

Buffer Stop

Illustrates the assembly of the buffer stop.

Vertical Cross-Section

Sliding Sash

Presents the vertical cross-section of a sliding sash.

Fixed Sash Standard and Fixed Sash Design

Shows vertical cross-sections for fixed sash types.

Scheme D, G1

Illustrates vertical cross-sections for Schemes D and G1.

Horizontal Cross-Section

Scheme A

Details horizontal cross-sections for Scheme A.

Scheme C, G1

Presents horizontal cross-sections for Schemes C and G1.

Scheme D

Illustrates horizontal cross-sections for Scheme D.

Notes

Maco HS Salamander evolution Drive 82 Specifications

General IconGeneral
BrandMaco
ModelHS Salamander evolution Drive 82
CategoryLifting Systems
LanguageEnglish