4
Important Information
General Information
The current version of our General Terms & Conditions can be found on the MACO website
(www.maco.eu/en-INT/Terms-and-conditions). Retain these assembly instructions for later use and
maintenance.
Failure to comply with these assembly instructions releases MACO from any liability. Please note your
obligation to inform your customer regarding the operation and maintenance of the system as well as all
safety related information.
MACO as a customer-oriented and service-oriented company oers you the "Operating and
Maintenance Instructions for SKB Standard, Self-locking, Positive Control and PAS END USER"
(Order number 757956) and "Maintenance and setting instructions for SKB Standard, Self-locking,
Positive Control and PAS SPECIALIST" (Order number 757961) for passing on to end customers.
You can nd the documents in the download area on www.maco.eu.
Please hand over the user manual to the end user and ensure they are briefed.
Target Group
This documentation is intended exclusively for specialist companies and certied specialists.
The work-steps described herein may only be carried out by certied specialists.
Certication
The MACO hardware mentioned in the assembly instructions are tested and regularly monitored in
standardised tests in accordance with EN 13126. The achieved Class H3 standard does not refer to your
individual element system. Due to a wide range of inuencing factors, individual element systems may
experience minor deviations from standardised testing, such as:
› the inuence of processing tolerances
› the eect of assembly tolerances aer installation of the element in the building envelope
› the use of accessories (e.g. weather seals, seal rails, handles, etc.)
› the use of attachments (e.g. Aluminium shells, sun protection on the sash, insect protection)
› environmental inuences (e.g. humidity, sunlight, high or low temperatures, temperature uctuations, etc.)
› room-side inuences (moisture, aggressive cleaning agents, etc.)
To Next Page
Loading...