setPlayList() 533
colorObjOrIntValue Required if setting the color to a color object or an integer value. A
reference to a color object that specifies the color of the pixel, or an integer that specifies the color
value of the pixel.
Example
This Lingo statement draws a horizontal black line 50 pixels from left to right in cast member 5:
See also
color(), draw(), fill(), getPixel(), image()
setPlayList()
Usage
-- Lingo syntax
soundChannelObjRef.setPlayList(linearListOfPropLists)
// JavaScript syntax
soundChannelObjRef.setPlayList(linearListOfPropLists);
Description
Sound Channel method; sets or resets the playlist of a sound channel.
This method is useful for queueing several sounds at once.
To see an example of
setPlaylist() used in a completed movie, see the Sound Control movie
in the Learning/Lingo folder inside the Director application folder.
Parameters
linearListOfPropLists
Required. A linear list of property lists that specifies parameters of a
playlist. You can specify these parameters for each sound to be queued:
Property Description
#member
The sound cast member to queue. This property must be provided; all others
are optional.
#startTime
The time within the sound at which playback begins, in milliseconds. The default
is the beginning of the sound. See
startTime.
#endTime
The time within the sound at which playback ends, in milliseconds. The default is
the end of the sound. See
endTime.
#loopCount
The number of times to play a loop defined with #loopStartTime and
#loopEndTime. The default is 1. See loopCount.
#loopStartTime
The time within the sound to begin a loop, in milliseconds. See loopStartTime.
#loopEndTime
The time within the sound to end a loop, in milliseconds. See loopEndTime.
#preloadTime
The amount of the sound to buffer before playback, in milliseconds.
See
preloadTime.
To Next Page