17
1. Installation reminder
Only competent persons are authorized to install the heat pump and should be educated with the relevant
building codes and standards of their current state or local governing body for all electrical, mechanical and
water services to prevent danger or damage to the unit.
a. Location and clearances
The inverter pool heat pump should be installed in a good ventilation place.
Please consult with your local service centre for indoor installation requirements
b. Typical installation diagram
Installations can differ dependent on-site conditions below is only a representation of one possibility.
Note: the inlet and outlet positions for the pipework is a representation only and can be positioned
differently.
Please see section: Installation options for more information of accessories available and different
plumbing layouts
To Next Page
Loading...
