Mafell MT 55 cc - User Manual

15 pages

Save Page as PDF

To Next Page

MT 55 cc

170215.0722/n

Tauchsäge

Originalbetriebsanleitung

Plunge cut saw

Translation of the original operating instructions

Scie circulaire plongeante

Traduction de la notice d'emploi originale

Sega ad immersione

Traduzione delle istruzioni d’uso originali

Invalcirkelzaag

Vertaling van de originele gebruiksaanwijzing

Sierra de incisión

Traducción del manual de instrucciones original

Upotussaha

Käännös alkuperäiskäyttöohjeesta

Sänksåg

Översättning av originalbruksanvisningen

Dyksav

Oversættelse af den originale betjeningsvejledning

WARNUNG

Lesen Sie alle Sicherheitshinweise und Anweisungen. Versäumnisse bei der Einhaltung der Sicherheitshinweise und Anweisungen können

elektrischen Schlag, Brand und/oder schwere Verletzungen verursachen. Bewahren Sie alle Sicherheitshinweise und Anweisungen für die

Zukunft auf.

WARNING

Please read all safety instructions and directions. Failure to comply with the safety instructions and directions can cause electric shock, fire

and/or serious injuries. Please retain all safety instructions and directions for future reference.

AVERTISSEMENT

Veuillez lire toutes les consignes de sécurité et instructions. Tout non-respect des consignes de sécurité et instructions risque d'être à

l'origine de décharges électriques, d'incendies et/ou de blessures graves. Conservez toutes les consignes et instructions pour pouvoir les

relire à tout moment.

AVVERTENZA

Leggere tutte le avvertenze di sicurezza e le istruzioni. La mancanza del rispetto delle avvertenze di sicurezza e delle istruzioni possono

causare scossa elettrica, incendio e/o gravi lesioni. Conservare tutte le avvertenze di sicurezza e le istruzioni per il futuro.

WAARSCHUWING

Lees alle veiligheidsaanwijzingen en instructies. Nalatigheid bij het naleven van de veiligheidsinstructies en aanwijzingen kan elektrische

schok, brand en/of ernstige letsels veroorzaken. Bewaar alle veiligheidsaanwijzingen en instructies voor later gebruik.

ADVERTENCIA

Lea todas las indicaciones de seguridad e instrucciones. Si no se cumplen las indicacionesde seguridad e instrucciones, se pueden producir

descargas eléctricas, incendios y/o lesiones graves. Guarde todas las indicaciones de seguridad e instrucciones para el futuro.

VAROITUS

Lue kaikki turvaohjeet ja käyttöohjeet. Laiminlyönti turvaohjeiden ja käyttöohjeiden noudattamisessa voi aiheuttaa sähköiskun, tulipalon ja/tai

vakavia vammoja. Säilytä kaikki turvaohjeet ja käyttöohjeet tulevaisuuden varalle.

VARNING

Läs alla säkerhetsanvisningar och anvisningar. Underlåtenhet att följa säkerhetsanvisningar och anvisningar kan orsaka elstötar, brand

och/eller allvarliga personskador. Behåll alla säkerhetsanvisningar och anvisning för framtida användning.

ADVARSEL

Læs alle sikkerhedshenvisninger og instruktioner. En manglende overholdelse af sikkerhedshenvisningerne og instruktionerne kan føre til

elektrisk stød, brand og/eller alvorlige kvæstelser. Opbevar alle sikkerhedshenvisninger og instruktioner til fremtidig brug.

Other manuals for Mafell MT 55 cc

Operating Instructions And Spare Parts List98 pages

Translation Of The Original Operating Instructions110 pages

Questions and Answers

S
Stephanie ThomasSep 9, 2025
What to do if the chip ejection is blocked on my Mafell Saw?
- A
  anitayorkSep 9, 2025
  If the chip ejection is blocked on your Mafell Saw, it could be because the wood is too damp, so clean the chip ejection. Alternatively, it could be due to extended operation without exhaustion. In this case, connect the saw to an external exhaustion system, such as a portable dust extractor.
R
Rebecca ParkerSep 12, 2025
What to do if the saw blade stops but the motor continues to turn on my Mafell Saw?
- P
  ppatelSep 12, 2025
  If the saw blade stops but the motor continues to turn on your Mafell Saw, the saw blade might not be correctly fastened. Retighten the saw blade to resolve this issue.
A
Amanda MeltonSep 13, 2025
Why does my Mafell Saw stop while cutting is in process?
- T
  Tracie WellsSep 13, 2025
  If your Mafell Saw stops during cutting, the issue could be due to a mains failure. Check the mains back-up fuses. Alternatively, the machine might be overloaded; try reducing the feed speed.
J
Jennifer SmithSep 15, 2025
Why are there burn marks on the cut surfaces when using my Mafell Saw?
- R
  ronaldbutlerSep 15, 2025
  Burn marks on the cut surfaces when using your Mafell Saw can occur if the saw blade is unsuitable for the task or if it is blunt. Replace the saw blade to resolve this issue.
E
Evan ChapmanSep 17, 2025
How to fix chip ejection blocked on Mafell MT 55 cc Saw?
- M
  Mark WongSep 17, 2025
  If the chip ejection on your Mafell Saw is blocked, it could be due to the wood being too damp. Another possible cause is extended operation without exhaustion. To resolve this, connect the saw to an external exhaustion system, such as a portable dust extractor.