MAFI Trac T230 - Page 65

OPERATION
OPERATING PANEL FOR THE AUTOMATIC TRANSMISSION
Operating manual T225 / T230 63
Driving gear reverse
Fig. 50: Reverse driving
X
Select the driving gear “Reverse” by pressing the button R.
Always shift from the neutral position (idle position)
and with wheels standing still into the driving gear R.
Driving gear neutral position
Fig. 51: Neutral position N (idle position)
X Start the engine.
When the motor is started, the control unit automatically
preselects the neutral position N.
3 The engine runs at idle speed
The engine can only be started in the neutral
position N.
When you want to shift from Reverse R or normal
Drive D into Neutral N make sure that the wheels are
standing still and the parking brake or main brake is
applied.
M
O
N
I
T
O
R
R
N
D
S
E
L
E
C
T
MODE
11-C25-067-084A-4
M
O
N
I
T
O
R
R
N
D
S
E
L
E
C
T
MODE
11-C25-067-084A-2