Magellan eXplorist User Manual

3
2. Select a destination...
Press the GOTO button.
Next you need to select which major category
the POI you want to go to resides. My Pts of
Interest are POIs you’ve created, Geocache Pts
are POIs that have been uploaded using the
Magellan Geocaching software, and
Background Map contains POIs that were
preloaded into your eXplorist with the
background map..
Browse either the
eXplorist’s internal memory
(or SD card if installed) to
find the POI you want to go
to.
3. Go to your destination.
Press
Use the joystick
to highlight your
desired
destination and
press Enter.
As you travel you
will notice that your
eXplorist will
continually update
your position as
well as providing
you with the
necessary details to
arrive at your
destination.
Basic Operation

Magellan eXplorist Specifications

General

Resolution	240 x 320 pixels
Battery Life	18 hours
Waterproof	IPX7
Update Rate	1 second
Waypoints	500
Routes	20
SBAS	WAAS/EGNOS
Memory Expandable	No
Screen Size	2.2 inches
Battery Type	2 AA batteries
Dimensions	1.3 inches
Accuracy	3 meters
Dimensions (inches)	1.3"
Maps	Basemap
Weight (oz)	5.3 oz (with batteries)